1.Features
● Work voltage:DC12V / 24V
●  Life  Span: 100,000   
●  G-3 LEDs with 4 bulbs
●  18 flash patters to pick up and can flash two lightheads together for  synchronization 
●  Waterproof and shockproof
●  Perfect  for interior and outer applications . 

2. Specifiation

Work voltage	DC12V / DC24V
Type	Traffic Signal
Light Sources	LEDS(G-III)
Type	Traffic Signal
Electric  Current	<=1.2A
Bulb number	4
Material of lens	PC
Flash patterns	15
Color	Red/Blue/Amber/Clear/Green

3. Mounting

● Position the unit in its proposed mounting location. Draw a pencil line onto the mounting surface along the top and bottom of the extrusion and a "centerline" centered between the two.

● Two 1/4" holes are required to mount this unit. These holes may be located anywhere along the holes as far apart as possible. Mark the hole location onto the mounting surface.

● Using a 1/4" drill bit, drill a hole in each of the areas scribed in the previous step.

● Slide the 2 carriage bolts (installed in the rear of the bar) insert them into the mounting holes.

● Secure the unit by threading the flat washer and elastic stop nut onto each bolt and tightening them firmly.

4.Wiring

See illustration diagram for wiring information

WARNING! All customer-supplied wires that connect to the positive terminal of the battery must be sized to supply at least 125% of the maximum operating current and at the battery to carry the load. DO NOT USE CIRCUIT BREAKER SWITH THIS PRODUCT!

5.Operation

132*40*45mm

Download Instruction Manual

Welcome to Starway Website!
Please free to send your enquiry to us by the following form. We will contact you as soon as possible and offer you the corresponding services.